8 relay outputs on the device can be remotely controlled with MODBUS RTU communication. When a relay is activated, it outputs the voltage connected to the COM terminal and the corresponding output LED lights up. Loads up to 5 amperes can be driven directly from the relay output. It is necessary to control the load through a contactor if current will be drawn over 5 Amps. In this case, the relay output is used as the trigger signal of the contactor.
This device was developed to remotely monitor the status of 8 dry contact inputs with MODBUS RTU communication. One end of the dry contact to be monitored is connected to the COM terminal and the other end is connected to any of the inputs I1-I8 and monitoring is performed. In the case of an open contact, the corresponding LED is off and in the case of a closed contact, the corresponding LED lights up.
It is used to remotely monitor environment variables such as temperature and light intensity with MODBUS RTU communication.
ANAELOG INPUT MODUL
Analog Input Module Data of analog sensors with 0-10V and 4-20 mA output can be read via RS-485 line with Modbus RTU communication.
It counts and records the counters giving pulse output. It has 6 inputs. Data can be read via RS-485 line with Modbus RTU communication. Time based counting can be done with the RTC chip on it.
|Product Code||Product Name||Product Description||Power Supply||Communication||Dimensions(mm)
|GA3401||OM C8D||8 OUTPUT MODULE (DC)||12 V DC*||RS-485||35 x 110 x 80|
|GA3402||OM C8A||8 OUTPUT MODULE (AC)||85-265 V AC||RS-485||35 x 110 x 80|
|GA3403||OM G8D||8 INPUT MODULE (DC)||12 V DC*||RS-485||35 x 110 x 80|
|GA3404||OM G8A||8 INPUT MODULE (AC)||85-265 V AC||RS-485||35 x 110 x 80|
|GA3405||OM AG||ANALOG INPUT MODULE||9-30 V DC||RS-485||35 x 110 x 80|
|GA3406||OM ISI||TEMPERATURE-LIGHT SENSOR||12 V DC||RS-485||50 x 50|
|GA3407||OM USB485||USB-RS485 CONVERTER (1.5kV insulated)||–||USB/RS-485||70 x 51 x 21|
|GA3408||OM PALS||PULSE COUNTER||9-30 V DC||RS-485||35 x 110 x 80|
*New versions of these products will soon be available with a 9-30 V DC supply